Install a Roller Garage Door in Under 4 Hours

Installing a DIY roller garage door yourself is not only cost-effective—it’s achievable in an afternoon with the right preparation. Based on our SeceuroGlide Original and SeceuroGlide Excel models, this time-efficient guide will walk you through surveying, tools, setup, curtain fitting, and commissioning in under 4 hours for experienced DIYers.

Estimated Total Time: 3–4 Hours

• Skill level: Intermediate DIY

• Tools needed: Drill, screwdrivers, rivet gun, spanners, level, tape measure, safety PPE

   

1. Survey & Pre-Installation Checks – 20 minutes

Before you start the build, check:

•    Wall structure is solid and flat
•   No pipes, cables, or obstructions
•   Floor is level
•   Door and opening dimensions match the order
•   All components are present and undamaged

Tip: Use a laser level or long spirit level to check plumb lines and flatness.

2. Gather Tools and Lay Out Parts – 15 minutes

Lay everything out on a protected surface (cardboard or bubble wrap). Cross-reference components with the manual checklist. Prepare tools including:

•    Drill with 7mm and 13mm bits
•   Screwdrivers
•   Pop rivet gun
•   No.12 screws and plugs
•   Crank handle
•   Spirit level

3. Prepare Opening and Guides – 30 minutes

•    Mark out and drill fixing holes in the guide rails (min. 4 per side)
•   Mount the guide rails, ensuring they’re vertical and at the correct height
•   Fix any floor anchors (if supplied for security)

Use 90mm guides for LPS1175-compliant installs and drive-through width optimisation.

4. Fit End Plates, Axle & Fascia – 30–40 minutes

•    Assemble and fix end plates into the guides
•   Insert the axle, ensuring it's level
•   Fix the motor and dummy end correctly
•   Secure with pan head screws and cable ties (drip loop included)
•   Optional fascia: fix using rivets and penny washers

Check axle rotation direction and tension the anti-fall spring if supplied.

5. Emergency Override Setup – 10 minutes

Install the manual override as a backup:

•    Insert the override eye into the motor housing
•   Secure with the holding screw
•   Clip the crank handle nearby

External override option takes longer and isn’t LPS1175 compliant.
 

6. Fit Curtain, Locking Arms & Stops – 30 minutes

•    Carefully lift the coiled curtain into the guides
•   Attach locking arms to the top slat
•   Align collars and secure with rivets
•   Raise door slightly and attach the bottom stops

Do not let the curtain drop—support it during install to prevent damage.

7. Set Motor Limits – 25–30 minutes

•    Use test lead or control unit to drive motor
•   Set closed position first
•   Then set open position with approx. 50mm of curtain still inside the guides
•   Secure limit switches

Refer to your specific motor (Somfy or SeceuroDrive) for exact procedures.

8. Adjust Curtain Height (If Needed) – 20 minutes

If the curtain is too tall or needs repair:

•    Lay flat on bubble wrap
•   Remove slats by unscrewing the webbing
•   Cut webbing and melt ends to prevent fraying
•   Reinstall and test curtain fit

Correct height ensures proper locking function.

9. Optional Box Support Installation – 15 minutes

If using a half- or full-box fascia:

•    Rivet the supports evenly inside the fascia
•   Drill through fascia using 4.2mm bit and secure with 4x8 rivets

10. Final Commissioning & Cleanup – 20–30 minutes

•    Remove protective wrap and wipe down components
•   Touch up scratches
•   Test electricals and safety edge
•   Label crank direction and test manual override
•   Apply silicone if externally mounted

Don’t forget to complete the CE marking and hand over the user manual.

Watch the Installation Video

Need a visual walkthrough? Watch our official installation video on our Security Direct You Tube Channel for step-by-step guidance.

Support When You Need It

While DIY installation is rewarding, we’re always here to help. Contact our support team if you have questions—or let us recommend a professional installer if you prefer.

Order your roller garage door today from Security Direct and enjoy the flexibility of DIY installation backed by professional-grade support and products.